Fire Sprinkler Jacking Pump 0.5hp NEW IDB35
The IDB35 series are peripheral pumps, with peripheral impeller containing numerous radial blades in its edge, suitable for pumping clean water and chemically non-aggressive liquid. They have relatively simple construction and are very economical, reliable and safe. The water pump can be used for household and domestic applications such as water supply from Tanks, Wells, Pools, Garden Sprinklers, Washing Booths etc.
Pumps should be installed in a covered area, protected against the weather.
- Pump Body: cast iron
- Motor Housing: aluminium
- Shaft: 45#steel /stainless steel
- Impeller: brass
- Motor: closed, externally ventilated
- H.Max: 35 Meter
- Suction. Max: 7 Meter
- Q.Max: 35 ltr/m
- Motor: 0.5hp
- 1 Meter power cable
- Insulation Class: B/F
- Protection Class: IP44
- Duty: continuously rated
- Mechanical Seal: ceramic steatite / metalized carbon
- Maximum Operating Pressure 8 Bar/ 800KPA
- 25mm(1 inch) Inlet/Outlet
If you use this pump to draw water from under the ground or well, you must install a check valve on the inlet side, the pumps must be totally under vacuum, or the pumps can't draw water.